Herman Miller Mirra 2 TriFlex Back Office Chair - Graphite - Fast Delivery
The Herman Miller Mirra 2 with a TriFlex (plastic) back builds on the design themes of the original Mirra chair, but with updated colours, style and improved functionality.
The TriFlex back is easy to keep clean in hard working environments.
--> WATCH our Video here to find out how to adjust the Mirra 2.
Key Features
- Fully adjustable arms
- Built-in PostureFit
- Adjustable lumbar support
- Tilt limiter & forward tilt
- Seat height adjustment
- Adjustable seat depth (Flex Front)
- Graphite base
- Graphite frame
- Graphite seat and back
- Vinyl armpads
- Choice of castors
Wellworking Says...
"Mirra 2 with the TriFlex back is one of our consistantly best selling office chairs, now available in Graphite finish for fast, free delivery."
Herman Miller Mirra 2 chair FAQs
How do I adjust the Mirra 2 Chair for optimal comfort?
• Seat Height: Lift the tab on the lower right side of the seat while taking your weight off the chair to raise it. To lower, lift the tab while seated. Your feet should rest flat on the floor with your upper and lower legs forming a 90-degree angle.
• Seat Depth (FlexFront®): Squeeze the handle under the front of the seat and adjust the seat edge up or down. Release the handle to lock in position. Ensure there’s a minimum of three fingers’ clearance between the back of your knees and the front seat edge.
• Tilt Tension (Harmonic™ Tilt): Turn the knob below the right front side of the seat clockwise to increase tension or counterclockwise to decrease it, adjusting the resistance when reclining.
• Tilt Limiter: Recline and move the vertical tab on the left front side of the seat up to set the recline limit. To release, lean forward and press the lever back.
• Forward Tilt: Recline and flip the horizontal tab on the left front side of the seat down to engage forward tilt, supporting a declined posture during tasks like typing. To release, recline and flip the lever up.
• Arm Adjustments: Adjust arm height by raising the tab on the outside lower base of each arm to unlock, moving the arm to the desired height, and lowering the tab to lock. For arm angle, grasp the front end of the armpad and pivot it inward or outward. To adjust arm depth, grasp the armpad and push it forward or back to the desired position.
• Lumbar Support: Rotate the levers on the lumbar support to loosen, slide it up or down to the desired height, and rotate the levers downward to increase depth or upward to decrease depth.
How do I clean and maintain the Mirra 2 Chair?
• Base, Frame, Butterfly Back™, and Seat Carrier: Clean with a soft cloth soaked in mild detergent and warm water. Rinse thoroughly and dry with a soft cloth. Avoid solvents or abrasive cleaners.
• Armpads: Clean with a soft cloth soaked in mild detergent and warm water. Rinse thoroughly and dry with a soft cloth. Avoid solvents or abrasive cleaners.
What are the key features of the Mirra 2 Chair?
• Butterfly Back™: A combination of fabric and polymer that acts as a suspension membrane, conforming to your shape and providing custom support.
• TriFlex Back: A polymer-only backrest with zones of support created by the size, shape, and pattern of perforations, meeting rigorous cleaning protocols.
• Harmonic™ 2 Tilt: Kinematic technology designed around the body’s natural pivot points, enabling the chair to move in tandem with your body through a range of postures, keeping you in balance without stressing any part of your body.
• Loop Spine: Enhances the chair’s responsiveness and gives you a greater range of supported movement.
• AireWeave Seat: An elastomeric suspension seat that conforms to your shape, distributes weight evenly, and prevents heat buildup.
• PostureFit Support: Patented sacral support that reinforces your pelvis, preventing slouching and fatigue while you sit.
Where can I find more information or assistance?
For additional questions or support, contact us at info@wellworking.co.uk
WARRANTY CLAIMS
All warranties are automatically applied by Wellworking and there is no need to register your product with the manufacturer.
Please keep your proof of purchase safe (it's easier for us to locate your order with the invoice or web order number) and, in the unlikely event a fault occurs, contact us by emailing service@wellworking.co.uk and we will arrange a service visit or replacement.
As a certified B Corp we are committed to putting sustainability at the core of all the products and services we offer.
Our products are designed with quality and longevity in mind and this is reflected in their long warranties.
We are working with our suppliers to reduce packaging and limit the use of non-recyclable packing materials. We take away all the packaging when we deliver products and recycle as much as we can within our offices to reduce the waste that goes to landfill.
This product has been awarded the Wellworking Greener Choice badge which means it has met our strict sustainability criteria. Find out more about Greener Choice here.
